Vilpe Velco 100 Air Supply Valve
Back to all products

Vilpe Velco 100 Air Supply Valve

Product Description Product Technical Files and Certs

Unique VELCO supply valve is equipped with a thermostat, fine electrostatic filter and muffler. Inlet valve provides free, but controlled, fresh and purified air into the building. It is especially important to limit heat loss in winter. Suitable for both natural and mechanical ventilation systems.


HOME VENTILATION PROVIDED BY VELCO SUPPLY VALVE WITH PERMANENT AIR SUPPLY, DELIVERS SIGNIFICANT BENEFITS:

  1. Simple and cost effective installation
  2. No problems caused by steam, smoke and carbon dioxide concentration
  3. Fresh air creates a healthy atmosphere and well-being home for residents

VELCO SUPPLY VALVE ADVANTAGES:

  • Open construction ensures the free flow of air.
  • Careful filtering (F9 class filter - fine filter)
  • Each filter contains fibers with permanent electrostatic charge, which increases the efficiency of the particle suspension;
  • Successfully stops the dust and pollen particles (which causes shortness of breath and cough), odor molecules as well as the health of the most dangerous mineral particles (0.0025 mm in size, which are released into the blood);
  • Equipped with a built-in silencer *.
  • Durable in different atmospheric conditions.
  • Ease of use.
  • Inlet valve equipped with a thermostat, which automatically changes the air flow depending on the outside temperature.
  • The thermostat fully opens the valve at temperatures above + 10 ° C and closes it at temperatures below -5 ° C.
  • Simple design allows you to quickly replace the filter (if necessary).
  • Easy assembly of both existing and newly built buildings.
  • 10-year warranty.
  • There is no need for electrical installations.


INSTALLATION RECOMMENDATION:

  1. One supply valve must be installed on every 20-30 m² area (applies Ø100 mm size) . Supply valve needs to be installed in each room (bedroom, living room). Other rooms (kitchen, toilets, bathrooms and lobby) stale air extracts through vents.
  2. The supply valve must be installed no less than 220 cm in height from the floor and maximum by diagonally from the entrance door.
  • Remember to replace the air filter at least once a year, when the filter surface gets heavily polluted. The filter is marked with the symbol Filter VS-100th
  • Use the silencer only if necessary (if the wall with a valve is located directly on the street), since the silencer reduces the flow of air.
Similar Products