MIDA STANDARD PV S4 Bitumen Felt

MIDA STANDARD PV S4 - SBS modified bitumen roofing and waterproofing membrane, BBA certified.

Application areas: Designed for installation as the bottom layer of roof cladding on buildings and constructions. Used for new roofing construction and for repair of old roof. Not recommended to use as one-layer roof cladding.

Description: MIDA Standard PV S4 is roll-fed, torchable, bitumen, roofing waterproofing membrane. Manufactured according to EN 13707:2004+A2:2009. Material is produced by two-sided placing of polymer-bitumen binder, consisting from bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler (talc, dolomite etc.), on the polyester carrier. Fine-grained sand or polymer film is used as the top protective layer. Polymer film is used on the bottom surface. The material does not contain the substances which are dangerous for the people or animals.

Application method: Torch-on application. Material can also be fastened mechanically, in this case membrane should be welded in the overlaps