TECHNOFLOOR Insulation Material

TECHNOFLOOR - Floor and Sound Insulation Material

Application areas

TECHNOFLOOR GRUNT slabs are designed for heat and sound insulation of floors on the ground, floating floors, and heated floors. TECHNOFLOOR STANDARD slabs are designed for heat- and sound insulation of floating floors when placing concrete or cement underlayment directly on heat insulation. TECHNOFLOOR PROF slabs are designed for heat- and sound insulation of floors with increased basic loads, including floating floors, heated floors, floors for underlayment of industrial, sports premises and warehouses.

Description of material

TECHNOFLOOR are nonflammable, waterproofing, heat and sound insulating slabs made of basalt rock stone wool with a low-phenol binder.

Storage

The slabs must be stored in covered warehouses. Storage under an awning protecting the slabs from atmospheric precipitation is permitted. slabs during storage should be laid in containers or in piles on pallets or linings. The piling height during storage should not exceed 2 m.

The acoustic properties for TECHNOFLOOR STANDARD slabs*

Sound absorption coefficients for the frequencies

Frequency, Hz 125 250 500 1000 2000 4000 5000

Thickness 50 mm 0,24 0,29 0,65 0,9 1,00 1,00 0,61

Thickness 100 mm 0,47 0,9 1,00 1,00 1,00 1,00 0,64

* Reports of acoustic tests confirmed by certificates issued by the Scientific Research Institute for Construction Physics (NIISF) of RAASN (Moscow) have been obtained for TECHNOFLOOR slabs.